Filter
Top Products
182
Specifications—continued
Lens aperture Instant-return type, with depth-of-field preview button
Autofocus TTL phase detection, Nikon Multi-CAM2000 autofocus
module
• Detection range: EV –1 to EV 19 (ISO 100, at normal
temperature)
Lens servo • Single Servo AF (S), Continuous Servo AF (C), Manual
focus (M)
• Focus Tracking automatically activated in Single Servo AF (S)
or Continuous Servo AF (C)
Focus area One or group out of 11 focus areas can be selected
AF Area mode • Single Area AF
• Dynamic AF
• Group Dynamic AF
• Dynamic AF Mode with Closest-Subject Priority
Focus lock Focus is locked by pressing AE/AF-L button or lightly pressing
shutter release button in Single Servo AF
Metering system TTL full-aperture exposure metering system
• 3D Color Matrix Metering: With G- or D-type lens (except
for DX- or IX-Nikkor)
• Color Matrix Metering: With AF Nikkor lens other than G- or
D-type (except AF Nikkor for F3AF), AI-P lens, non-CPU lens
with lens data specified
• Center-Weighted Metering: Approx. 75% of the meter’s
sensitivity concentrated on the 12mm dia. circle
• Spot Metering: 4mm dia. circle (approx. 1.5% of entire
frame); shifts according to focus area selected
Metering range 3D Color Matrix Metering: EV 0-20
Center-Weighted Metering: EV 0-20
Spot Metering: EV 2-20
(at normal temperature, ISO 100, 50mm f/1.4 lens)
Exposure meter coupling
CPU and AI combined, meter coupling lever can be modified
Exposure compensation
Exposure compensated in ±5 EV range, in 1/3, 1/2 or 1 steps
Auto Exposure Lock
Detected exposure value locked by pressing AE/AF-L button
Auto Exposure Number of shots: 2-7; compensation steps: 1/3, 1/2, 2/3 or 1
Bracketing EV steps
Film speed setting
• DX or manual selectable (manual setting has priority over
DX detected film speed)
• Film speed range:
DX: ISO25-5000, Manual: ISO 6-6400 in 1/3 steps
Shutter Electronically controlled vertical-travel focal-plane shutter (with
built-in shutter monitor)
P930_En 04.10.19 7:19 PM Page 182