Filter
Top Products
126
Shooting Menu [Imprinting Shooting Data]
Shooting data can be imprinted within or between the frames or on
one frame before the first frame (frame number 0).
• Imprinting data in-frame
Date, date and time, a number of your choice, the frame count number or a
sequential number can be imprinted in-frame.
•Imprinted data
Date:
The year/month/day (month/day/year or day/month/year) of shooting is imprinted.
• If you change the display order to month/day/year or day/month/year in “Date” in
SET UP menu (x 36), the date is imprinted in that order.
Date and time:
Day/hour/minute of the shooting is imprinted.
User Index No.:
Designated six-digit number is imprinted.
• The same user index number can be imprinted between frames (x 130)
Frame count number:
The frame counter number indicated in the top LCD panel and viewfinder during
shooting is imprinted.
Sequential number:
A sequential six-digit number beginning from the number selected by the user (x
129) is imprinted when each shot is taken. The number is increased by one for each
frame following the first frame. This is useful in confirming the total number of
frames.
• The number returns to “00 00 00” after “99 99 99”.
• The sequential number can also be imprinted between frames (x 130). The
number continues to increase as long as the in-frame or between frames imprint is
selected. The number does not change if the sequential number is not selected.
• The sequential number does not change when film is not loaded or when film is
advanced to the first frame after loading.
• The sequential number does not reset when the camera back is opened for film
change.
• In multiple exposure mode (x 138), the number only increases once, at the first
exposure.
P930_En 04.10.19 7:19 PM Page 126