Nikon 1799 Digital Camera User Manual


 
185
Miscellaneous
Power source Battery holder MS-41 provided (two 3V lithium batteries);
optional Multi Power Battery Pack MB-40 and AA-type battery
holder MS-40 available (for eight alkaline-manganese, lithium
or Ni-MH batteries, or one Rechargeable Li-ion Battery EN-EL4
with optional Battery Chamber Cover BL-3); built-in backup
battery for internal clock
Power switch Power ON, OFF and LCD panel illuminator on position
Exposure meter Auto meter shut-off 8 sec. after power turned on if no
operations are performed; activated by lightly pressing shutter
release button or pressing AF start button after power is
turned on
Battery power N for sufficient power; ˜ indicates batteries has began
confirmation exhaustion; M indicates low battery power; blinking M
indicates batteries are j exhausted; no indication/symbol
appears when batteries are completely exhausted or
improperly installed
Usable number of The usable number of film roll is tested under following conditions by
36-exposure film Nikon
rolls per set of Test 1
fresh batteries Camera setting: Using an AF-S VR 24-120mm f/3.5-5.6G ED lens,
Vibration Reduction function on, in Continuous Servo AF with film
advance mode at S and shutter speed of 1/250 sec.
Autofocus operation:After lightly pressing the shutter release button for
8 sec., autofocus operation covers the full range from infinity () to the
closest distance and back to infinity () before each shot. After the
exposure meter automatically turns off, the same operation follows for
the next shot.
Temperature
At 20°C/68°F At –10°C/14°F
Battery
3V lithium Approx. 15 Approx. 6
AA-type alkaline-manganese
(with MB-40)
Approx. 10 Approx. 1
AA-type Ni-MH (with MB-40) Approx. 30 Approx. 30
AA-type lithium (with MB-40) Approx. 45 Approx. 35
Rechargeable Li-ion Battery EN-EL4
(with MB-40)
Approx. 35 Approx. 25
P930_En 04.10.19 7:20 PM Page 185