130
Shooting Menu [Imprinting Shooting Data]—continued
• Imprinting data between frames
In addition to the date, date and time, user index number, frame count
number or sequential number, which can also be imprinted in-frame,
additional detailed shooting data can be imprinted between frames.
•Imprinted data
Date, date and time, user index number, frame count number or sequential
number:
See the in-frame imprinted data on page 126 for details.
Shutter speed:
The shutter speed displayed in the top and rear LCD panels (in detailed and large
display) and viewfinder when pictures are taken is imprinted.
Aperture:
The aperture displayed in top and rear LCD panels (in detailed and large display) and
viewfinder when pictures are taken is imprinted.
• When a non-CPU lens is attached and the lens’ maximum aperture is not specified
in “specifying lens data” (x 144), the number of EV steps from maximum
aperture (with the
P mark) is imprinted.
Exposure mode:
Location of imprinted “
•
” indicates the exposure mode.
• Programmed Auto: no indication
• Shutter-Priority Auto: indication at the shutter speed
• Aperture-Priority Auto: indication at the aperture
• Manual: indications at both shutter speed and aperture
Exposure compensation value:
Selected exposure compensation value (x 74) is imprinted in Programmed Auto,
Shutter-Priority Auto and Aperture-Priority Auto. In Manual exposure mode, under or
over EV value from the correct exposure is imprinted (within ±9.7, if the value
exceeds, –9.7 or +9.7 is imprinted).
• “0.0” is imprinted if no exposure compensation is set.
• “--” is imprinted in multiple exposure (x 138).
• In Auto Exposure Bracketing (x 75), added compensation value of the Bracketing
is imprinted. See “Recorded/imprinted exposure compensation/flash exposure
compensation value” on page 148 for details.
Flash exposure compensation (fi=):
Flash exposure compensation value set in flash shooting is imprinted. (See the
instruction manual of the Speedlight for the flash exposure compensaiton.)
• If no flash exposure compensation is set, “0.0” is imprinted.
P930_En 04.10.19 7:19 PM Page 130