Filter
Top Products
51
Focus area display in the rear LCD panel (in normal and detailed displays)
g: Single Area AF Mode
Selected focus area is highlighted.
h: Dynamic AF Mode
Selected focus area is highlighted.
f: Group Dynamic AF Mode
Selected focus area group is highlighted as illustration on page 53.
j: Dynamic AF Mode with Closest-Subject Priority
All focus areas are highlighted with “
.
”(focus area is selected
automatically, x 53).
The selected focus area can be locked by rotating the focus area selector
lock release to lock position.
The focus area can also be changed with the optional focusing screen
(x 168).
CSM a5: In manual focus or continuous shooting, you can cancel the
highlighting of the selected focus area. Also, you can change the duration of
the red focus area display to 0.2 sec. or 1 sec. (x 95).
CSM a6: The focus area position can be set to change continuously on the
same horizontal or vertical plane. This enables the focus area to be switched
to the opposite position without pressing the opposite direction on the multi-
selector (x 96).
CSM f1: Selected focus area can be set to be highlighted when you press the
center of the multi-selector. Also, any operation activated by pressing the
center of the multi-selector can be canceled (x 107).
Detailed Operation
P930_En 04.10.19 7:18 PM Page 51