Filter
Top Products
16
1. Installing Batteries
Use two 3V lithium batteries.
1
Turn the power switch off, then turn the
battery holder (MS-41) release knob toward
the ◊ icon to release the lock.
• When replacing batteries, be sure to turn the
power switch off and replace both batteries at
the same time. Always use fresh batteries of
the same brand and type.
2
Remove the battery holder and insert two
3V lithium batteries with the “+” and “–”
ends positioned as marked on the battery
holder.
• Incorrect positioning of the batteries’ + and –
poles may damage the camera.
3
Return battery holder to the battery
chamber and turn the battery holder release
knob away from the ◊ icon to lock the
holder.
P930_En 04.10.19 7:18 PM Page 16