Filter
Top Products
119
Menu Guide
• Memory full setting
Select operation when the number of film rolls that can be recorded in the
camera’s memory (x 117) has been exceeded (overwrite shooting data without
warning or warning is displayed and shutter is locked without overwriting).
1
Turn the power switch on while film is not loaded. Press the MENU
button to display menu and select Shooting data menu in the SET-UP
menu.
• See steps 1 and 2 on page 116 to display Shooting data menu.
• Unload the film before setting. Memory full setting cannot be selected when
the film is loaded.
• “Memory full” cannot be set when any shooting data is stored in the camera’s
memory. Delete all shooting data (x 118) before setting.
2
Select Memory full setting.
• Press P/{ to select “Overwrite
data” or “Stop data rec.” and > to
set. The Shooting data menu
reappears.
• Press P/{ on multi-selector to
select “Memory full” and > to set.
3
Complete the procedure.
• Press < to backtrack display by display, or press MENU button twice to return
to the Shooting data display.
Memory full options
When the number of film rolls that can be recorded in the camera’s memory has
been exceeded:
Overwrite data (default setting)
• The oldest data is overwritten by new data
• No warning indication
Stop data rec.
• The shutter locks and data recording stops
• Warning indication displayed
P930_En 04.10.19 7:19 PM Page 119