Filter
Top Products
43
Detailed Operation
Film
• Aligning frame counter and number of frame on the film
The frame counter and the number of frame on the film in use can
be aligned.
• Confirming film advance status
Film advance status can be confirmed while camera back is opened.
Insert film after rotating the camera sprocket
with your finger until it stops rotating.
• You can rotate the sprocket in either direction.
• The frame counter and the number of frame on the
film may not align precisely with some films.
1
Turn the power switch on and lift the film
rewind knob. The camera back will pop
open.
2
Insert film and press the film rewind knob
down.
3
Align the film leader to the index mark and
depress the shutter release button.
• Depress the shutter release button while
aligning the perforations on the film with the
projections on the film spool.
• Film advances another frame when the camera
back is closed. (Release the shutter when
“Press rel button” is set in Custom Setting “d1:
Film loading”, x 101.)
• Note that the usable number of frames
decreases as you keep depressing the shutter
release button to confirm the film advance
status.
P930_En 04.10.19 7:18 PM Page 43