Filter
Top Products
104 C626M-B (3/05)DX8000 PC Client Application
LINKING RELAY OUTPUTS TO MOTION AND ALARM EVENTS
To access relay link settings:
1. Click .
2. Click .
3. Click the Event - Relay Link Settings tab.
Linking Relay Outputs to Motion Events
To set relay outputs to activate in response to motion detection events:
1. Select a camera from the Camera Channel drop-down box.
2. Click the button of each relay you want to link to the selected camera.
3. Click Apply.
Figure 129. Linking Relays to Motion Events
TIP: You can also drag relays onto cameras in the site tree while in Live mode (main screen).
ᕣ
ᕡ
ᕢ