Filter
Top Products
C626M-B (3/05) 23
DX8000 PC Client Application
6. If necessary enter a software upgrade port number (9003 is the default).
7. Click OK. The site appears in the Connection List.
To add a remote DVR site to the Connection List when you do not know the IP address of the site:
1. Click . The Connection List dialog box opens.
Figure 16.
Connection List Dialog Box
2. Click DX8000 Scan. The DX8000 Scan dialog box opens.
Figure 17.
DX8000 Scan Dialog Box
3. Enter an IP address range to search for DVR sites.
a. Enter the first three octets of the IP range you wish to search; for example, 10.10.1.
b. Enter the beginning value for the search range in the fourth octet; for example, 001.
c. Enter the final value for the search range in the text box provided; for example, 254.
NOTE:
To be successful, the following stipulations must be satisfied:
•
Each DVR must be attached to the same subnet.
•
The first three octets of the IP address of the subnet must be known.
•
The range of addresses used in the last octet of the subnet must be known.
NOTE:
Each octet of the IP address must be an integer between 1 and 255.
ᕥ
ᕤ
ᕦ
3a 3b 3c