Pelco C626M-B Security Camera User Manual


 
92 C626M-B (3/05)DX8000 PC Client Application
EXPORTING A SEQUENCE OF STILL IMAGES
To export a sequence of still images:
1. Select a still image format. Options are BMP, JPEG, and TIF.
2. Select the number of images (1 to 999) you want to save in the sequence.
3. Select the time interval between each saved image in the sequence. Options are
Continuous
0.5 seconds
1 second
2 second
3 second
4 seconds
5 seconds
Figure 118. Still Image Export Formats
FINALIZING AN EXPORT PROCESS
To finalize the export process:
1. Make sure that the export media selected is inserted in the drive unit and that the drive is ready.
2. Select the check mark of each time range you want to export.
3. Select the Audio Record check box if you want to include recorded audio.
4. Select the Real Time check box to export video using standard clock time.
NOTE: Still image formats export the first frame of a bookmarked region and then a single frame for each time interval until the number of
images specified has been exported. For example, consider exporting a six-hour bookmarked region of video with an image count of 100
and a time interval of 3 seconds. The resulting export will include the first frame of the bookmarked region followed by 99 additional
images taken at 3-second intervals. The first exported image will be the first frame of the bookmarked region and the last image will be the
frame taken at 300 seconds into the bookmarked region.
NOTE: Audio export is available only with DX8000 Native, AVI, and ASF video formats.
NOTES:
Real Time setting only applies to DX8000 Native, AVI, and ASF video formats.
When the Real Time check box is selected, the DX8000 will export video so it can be played back in real time (30 fps) for the same
length of time as the original recording. For example, if video was recorded at 1 fps, this means the DX8000 will insert 29 null frames
for every 1 frame of actual video. Thus, one minute of video recorded at 1 fps (60 frames total) will play back for one minute at
30 frames per second (60 frames of actual video interspersed with 1,740 null frames). If the Real Time check box is not selected, one
minute of video recorded at 1 fps will play back in two seconds in real time. Figure 119 illustrates the two video streams: one padded
with null frames to match the actual time duration and another stream without null frames.