Filter
Top Products
C626M-B (3/05) 107DX8000 PC Client Application
Linking PTZ Presets and Patterns to Alarm Events
To link an alarm input to a camera so that activation of the alarm results in a repositioning of that camera:
1. Click .
2. Click .
3. Click the Event - Relay Link Settings tab.
4. Select an alarm from the Alarm Channel drop-down box.
5. Select a camera to be linked from the Linked Camera Channel drop-down box. (This camera will change PTZ position in response to an
alarm input detected by the source alarm.)
6. Select a PTZ preset or pattern for the linked camera:
a. To force the linked camera to move to a PTZ preset in response to an alarm input detected by the source camera:
• Select the Linked Camera Preset radio button.
• Select a PTZ preset (1-32) for the camera to move to.
or
b. To force a PTZ pattern to be activated in response to an alarm input detected by the source camera:
• Select the Linked Camera Pattern radio button.
• Select a PTZ pattern (1-4) to be activated on the camera.
7. Click Apply.
Figure 132. Linking Presets and Patterns to Alarms
NOTE: The selected camera must support PTZ functions and at least one PTZ preset/pattern must be defined for this function to work.
ᕤ
ᕥ
6a
6b
ᕣ
ᕧ