Filter
Top Products
C626M-B (3/05) 99DX8000 PC Client Application
MOTION DETECTION SETUP
Up to five motion detection zones can be defined for each camera. When the DX8000 is scheduled to record motion detection, motion sensed in
the selected zone will result in video data being recorded for that channel. Motion detection can also be used to trigger relays, PTZ presets, and
recording on multiple cameras. Refer to Schedule on page 110 and Linking on page 102 for more information.
To define motion detection zones for the selected camera:
1. Select the motion zone (1-5) from the drop-down box.
2. Click the Hide/Show button to either hide or display the motion grid.
3. Move the Number of Blocks slider to change the grid size of the motion overlay.
4. Define the area for motion detection:
• Click Clear All to remove the currently defined motion detection area.
• Click Select All to enable motion detection for the entire viewable area.
• Hold down the left mouse button and drag to select areas.
• Hold down the right mouse button and drag to deselect areas.
5. Move the Sensitivity slider to adjust motion sensitivity. Moving the slider to the left decreases motion sensitivity, moving the slider to the
right increases sensitivity.
6. Click Apply.
Figure 124. Camera Motion Detection Setup
ᕤ
ᕡ
ᕢ
ᕣ
ᕥ
ᕦ