Filter
Top Products
C626M-B (3/05) 155DX8000 PC Client Application
EMERGENCY E-MAIL NOTIFICATION SETUP
The DX8000 can be configured to send e-mail notifications alerting users of motion and alarm events. Users with Power User access and higher
can configure e-mail notification. Notifications can be sent to a single e-mail address or a group of addresses either immediately after an event
occurs or periodically according to a predefined schedule. You can configure up to 32 e-mail groups. Up to 32 members can be assigned to each
e-mail group.
Before sending notifications, you must provide information about your e-mail server and establish what events, motion and/or alarm, you want to
include in the e-mail message. Timing and frequency of the e-mail notifications must also be set. You should test the e-mail notification function
immediately after configuration to ensure your system is set up correctly.
ACCESSING THE EMERGENCY E-MAIL NOTIFICATION SETUP
To access the emergency e-mail notification setup:
1. Click .
2. Click .
3. Click the Emergency E-mail Notification Setup tab.
Figure 197. E-Mail Notification Setup
IMPORTANT: To use emergency e-mail notification, the DX8000 Series DVR must be connected to a local area network (LAN) that main-
tains an SMTP mail server. The network must also be connected to either an intranet or the Internet depending on the location of the e-mail
accounts to which you want to send notifications. Consult your network administrator for information on configuring e-mail notification on
your local network.
ᕣ