Filter
Top Products
228 C626M-B (3/05)DX8000 Web Client
PTZ PRESETS
A preset is a user-defined camera position using pan and tilt, zoom, and focus commands. A DX8000 Series DVR can address up to 32 PTZ
presets (1-32). Preset 95 is reserved for remote camera setup, and preset 99 is reserved for camera autoscan mode.
PROGRAMMING A PRESET
To program a PTZ preset:
1. Drag a camera from the site tree onto a view panel.
2. Click .
Figure 303. Web View and PTZ Control Panel
NOTE: Only cameras that support positioning and programming using D, P, or Coaxitron protocols can use this feature.
IMPORTANT: To program or clear presets, preset tours, and patterns, the icon must be engaged. To activate presets, tours, and
patterns, the icon must be disengaged.
TIP: Clicking the icon places DX8000 in PTZ programming mode. While in PTZ programming mode, multiple presets
can be programmed until the icon is pressed again.