Filter
Top Products
C626M-B (3/05) 219DX8000 Web Client
3. Enter the name of the DX8000 Series DVR you wish to connect to.
4. Enter the IP address of the DVR.
5. If necessary enter a new base port number (9002 is the default).
6. If necessary enter a software upgrade port number (9003 is the default).
7. Click OK. The site appears in the Connection List.
To add a remote DVR site to the Connection List when you do not know the IP address of the site:
1. Click . The Connection List dialog box opens.
Figure 289. Connection List Dialog Box
NOTE: Consult your network administrator before assigning or changing port numbers. Make sure that the ports are not blocked internally,
but are protected from external threats by a firewall. Web client and server ports must be identical.
NOTE: To be successful, the following stipulations must be satisfied:
• Each DVR must be attached to the same subnet.
• The first three octets of the IP address of the subnet must be known.
• The range of addresses used in the last octet of the subnet must be known.