Filter
Top Products
106 C626M-B (3/05)DX8000 PC Client Application
LINKING PTZ PRESETS AND PATTERNS TO MOTION AND ALARM EVENTS
The DX8000 can be configured in such a way that motion detected by one camera will result in the repositioning of another. Similarly, alarm
inputs can be set to trigger camera-positioning presets. Only a single preset or pattern can be linked to a camera.
Linking PTZ Presets and Patterns to Motion Events
To link two cameras so that motion detected on one results in the repositioning of another:
1. Click .
2. Click .
3. Click the Event-Relay Link Settings tab.
4. Select a camera from the Camera Channel drop-down box. (This camera will be the motion source.)
5. Select a camera to be linked from the Linked Camera Channel drop-down box. (This camera will change PTZ position in response to motion
detected by the source camera.)
6. Select a PTZ preset or pattern for the linked camera:
a. To force the linked camera to move to a PTZ preset in response to motion detected by the source camera:
• Select the Linked Camera Preset radio button.
• Select a PTZ preset (1-32) for the camera to move to.
or
b. To force a PTZ pattern to be activated in response to motion detected by the source camera:
• Select the Linked Camera Pattern radio button.
• Select a PTZ pattern (1-4) to be activated on the camera.
7. Click Apply.
Figure 131. Linking Presets and Patterns to Motion Events
NOTE: The selected camera must support PTZ functions and at least one PTZ preset/pattern must be defined for this function to work.
ᕣ
ᕤ
ᕥ
ᕧ
6a
6b