Filter
Top Products
124 C626M-B (3/05)DX8000 PC Client Application
CONFIGURING FRAME RATE
The DX8000 can record at frame rates up to 480 images per second (ips) NTSC and 400 ips PAL. This total frame rate capacity is distributed
among eight or sixteen channels, depending on the configuration of your unit. Resolution and frame rate values can be assigned evenly among all
channels or can be configured independently for individual channels. Frame rate values can also be customized according to recording mode type
(normal, alarm, or motion).
Two setup modes are provided to allow Power Users and Administrators to configure recording frame rates on the DX8000. All channels are
optimized to provide 30 ips frame rates at 320 x 240 resolution NTSC (352 x 288 resolution PAL). Basic mode allows changes to be made in the
frame rates available to each channel, while resolution values must remain constant. Advanced mode allows users to change both frame rate
and resolution settings.
To access the frame rate configuration screen:
1. Click .
2. Click .
3. Click Frame Rate Configuration.
Figure 157. Frame Rate Configuration Button
ᕣ