Filter
Top Products
Chapter 7 Menu Displays and Detailed Settings
118
7-2 Status Display on the Viewfinder Screen
You can set the following items on the SHOT DISP
page.
1) To carry out superimposed recording, select the SHOT ID number (1 to 4).
Not to carry out superimposed recording, select “OFF”.
3
Turn the MENU knob to move the b mark to the item
you want to set, and press MENU knob.
The b mark on the left of the selected item changes to
a z mark and the z mark on the left of the setting
changes to a ? mark.
4
Turn the MENU knob to select whether or not to
record the selected item superimposed on the color
bars, and press the MENU knob.
The z mark on changes to a b mark and the ? mark
changes to a z mark.
5
To continue setting other items, repeat steps 3 and 4.
6
To end the menu operation, set the MENU ON/OFF
switch to OFF or close the cover of the menu operating
section.
To carry out superimposed recording
To actually record the items selected for superimposed
recording on the SHOT DISP page, set the OUTPUT/DCC
switch to BARS, DCC OFF.
The items selected for superimposed recording appear on
the screen and are recorded superimposed on the color
bars.
7-2-7 Setting the Shot ID
On the SHOT ID page of the USER menu, you can set a
shot ID of up to 12 alphanumeric characters, spaces, and
symbols.
When the OUTPUT/DCC switch is set to BARS, DCC
OFF, this shot ID is output with the color bar signal. The
shot ID comprises ID1 to ID4, and the setting can be
changed using the SHOT DISP page of the USER menu.
You can select the SHOT ID to be recorded superimposed
on the color bars on the SHOT DISP page.
Note
When the menu is displayed, the shot ID is not displayed
even if the color bar signal is output.
To set the shot ID, proceed as follows.
Setting the shot ID
1
Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the screen.
2
Turn the MENU knob until the SHOT ID page
appears, and press the MENU knob to select the page.
3
Turn the MENU knob to move the b mark to the ID
(one of ID-1 to ID-4) you want to set, and press the
MENU knob.
A x mark appears over the first character position in
the string, and characters can now be input.
Item Description
SHOT DATE Selects whether or not the shot data is
superimposed (ON or OFF).
SHOT TIME Selects whether or not shot time is
superimposed (ON or OFF).
SHOT MODEL
NAME
Selects whether or not the model name
is superimposed (ON or OFF).
SHOT SERIAL
NO.
Selects whether or not the serial
number is superimposed (ON or OFF).
SHOT ID SEL
Selects whether or not the shot ID set
on the SHOT ID
1)
page is
superimposed (1 to 4 or OFF).
SHOT 16:9 ID Selects whether or not the 16:9 mode
indicator is superimposed (ON or OFF).
SHOT BLINK
CHARA
Selects whether or not the blinking * is
superimposed (ON or OFF).
U12 SHOT DISP
SHOT DATE : OFF
SHOT TIME : OFF
SHOT MODEL NAME : OFF
SHOT SERIAL NO : OFF
SHOT ID SEL : OFF
SHOT 16:9 ID : OFF
SHOT BLINK CHARA: OFF
CANCEL/PRST /
ESCAPE switch
MENU knob
MENU ON/OFF switch
U11 SHOT ID
ID-1 :
ssssssssssss
ID-2 :
ssssssssssss
ID-3 :
ssssssssssss
ID-4 :
ssssssssssss
TOP