Filter
Top Products
Chapter 2 Locations and Functions of Parts and Controls
40
2-10 Indicators in the Viewfinder
Time code display
Time code display on the color LCD
2-10 Indicators in the
Viewfinder
Several indicators are provided above and below the
viewfinder screen to indicate the current state and
adjustments of the camera.
Indicators on the viewfinder
a TALLY (green tallly) indicator
This indicator lights when the camcorder is in Picture Cash
mode. Also, this indicator lights when a green tally signal
is received from the camera control unit.
b REC (recording, red tally) indicator
This indicator lights red when recording starts and remains
lit during recording. It also lights when a red tally signal is
received from the camera control unit and flashes to give a
warning.
For details, see 10-3 “Operation Warnings” on page 168.
c BATT (battery) indicator
This indicator starts flashing when the battery connected to
the camcorder is nearly exhausted, and stays lit when the
battery is completely exhausted.
The battery power level at which the indicator starts
flashing can be set on the BATTERY page of the
MAINTENANCE menu.
For details, refer to the Maintenance Manual.
d (warning) indicator
This indicator lights when any of the following conditions
occurs with the corresponding item set to ON on the “!”
LED page of the USER menu.
• The gain is set to other than 0 dB.
• The SHUTTER selector is set to ON.
• The WHITE BAL switch is set to PRST.
• ATW is enabled.
Lights when the time code
generator is on hold.
Lights when VITC is selected for the time code.
Lights in playback mode.
Lights in non-drop frame
mode. (PDW-510/530 only)
Lights when the camcorder is
synchronized with an external time code.
Lights when the time code or real time is displayed.
1) When the HOLD button is pressed to hold the time code value,
the time code is displayed in the format shown below. When the
HOLD button is pressed again to release the hold, the time code
is displayed in the normal format.
Lights when the HOLD button is pressed
1)
Time counter display: Shows the time code, user
bit data, and real time.
1 TALLY indicator
2 REC (recording) indicator
3 BATT (battery) indicator
4 (warning) indicator
5 Spare indicator
6 SAVE indicator
Viewfinder screen