Filter
Top Products
Chapter 2 Locations and Functions of Parts and Controls
37
2-8 Warnings and Indications
e Back tally switch
This switch enables or disables the back tally and rear tally
indicators.
ON: The back tally and rear tally indicators are enabled.
OFF: The back tally and rear tally indicators are disabled.
f Monochrome LCD
This shows the remaining battery capacity, remaining disc
capacity, time data, and so on.
For details, see 2-9-1 “Monochrome LCD” on page 38.
g DISP SEL (display selection) switch
This switches the display in the color LCD.
CHAR: Display video with superimposed text. With the
MENU ON/OFF switch set to OFF, also display
camcorder status indications similar to those displayed
in the viewfinder (see 7-2 “Status Display on the
Viewfinder Screen” on page 112).
MONI: Display video without superimposed text.
STATUS: Display counter, warnings, and audio levels.
h Color LCD
This displays VDR-related warnings, remaining battery
capacity, remaining disc capacity, audio levels, time data,
and so on.
For details, see 2-9-2 “Color LCD” on page 39.
i WARNING indicator
This indicator lights up or flashes when there is a fault in
the VDR.
For details, see 10-3 “Operation Warnings” on page 168.
j ACCESS indicator
This lights when data is written to or read from the disc.
k Rear tally indicator
When the back tally switch is set to ON, this indicator has
the same function as the tally indicator.
l LCD switch
This controls the color LCD.
OFF: The color LCD is turned off.
L: The color LCD is adjusted for viewing indoors.
H: The color LCD is adjusted for viewing outdoors.