Filter
Top Products
Chapter 7 Menu Displays and Detailed Settings
120
7-2 Status Display on the Viewfinder Screen
This window allows you to confirm why the ! (warning)
indicator lights.
You can use the '!' LED page of the USER menu to set
whether or not the ! (warning) indicator lights.
FUNCTION window
This window allows you to confirm the assigned function
of the ASSIGN 1/2/3/4 switches, ON/OFF of the Loop Rec
function, and ON/OFF of the output of the VIDEO OUT
connector.
AUDIO STATUS window
This window allows you to confirm the following items
related to audio.
• Audio bit rate
• Setting condition of DF/NDF (only for the PDW-510/
530)
• Type of front microphone
• Type of input signal to audio channels 1 to 4
• Input level of audio channels 1 to 4
You can use the SET STATUS page of the USER menu to
set whether or not the status confirmation windows are
displayed.
To display the status confirmation
windows
You can use the CANCEL/PRST / ESCAPE switch as the
STATUS ON/SEL / OFF switch when the MENU ON/
OFF switch is set to OFF (when the cover of the menu
operating section is closed, OFF is automatically selected).
To disable display of the status
confirmation windows
Proceed as follows.
1
Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the screen.
2
Turn the MENU knob until the SET STATUS page
appears, and press the MENU knob to select the page.
3
Turn the MENU knob to move the b mark to the item
you want to set, and press MENU knob.
FUNCTION
FORMAT: I
ASSIGN<1> ATW <2> OFF
<3> OFF <4> OFF
<T>TURBO
ZEBRA :OFF SELECT: 1
DET 70% APT: 10%
DET2 100%
P.CACHE : OFF: 0-2s
- Actual State ---------
REAR BNC:OFF
AUDIO STATUS
16bit DF F.MIC:MONO
CH2:FRONT CH3:FRONT
CH2:FRONT CH4:FRONT
1:
2:
3:
4:
Item Description
ABNORMAL Selects whether or not the ABNORMAL
window is displayed (ON or OFF).
FUNCTION Selects whether or not the FUNCTION
window is displayed (ON or OFF).
STATUS AUDIO Selects whether or not the STATUS
AUDIO window is displayed (ON or
OFF).
By pushing the STATUS ON/SEL
/ OFF switch up to ON/SEL, the
confirmation window appears.
Each time you push this switch up
to ON/SEL, the window switches.
After 10 seconds, the window
disappears automatically.
To make the window disappear
promptly after displaying the
window, push this switch down
to OFF.
U13 SET STATUS
STATUS ABNORMAL : ON
STATUS FUNCTION : ON
STATUS AUDIO : ON