Filter
Top Products
Using AF to Focus (AF Method)
114
2
Focus the subject.
Aim the AF point over the subject and
press the shutter button halfway.
When focus is achieved, the AF point
turns green and the beeper sounds. (If
[AF operation] is set to [Servo AF], the
AF point turns blue and the beeper will
not sound.)
If focus is not achieved, the AF point will
turn orange.
3
Take the picture.
Press the shutter button completely
(p.64).
Human faces are detected and focused. If a face moves, the AF point <p>
also moves to track the face.
1
Check the AF point.
When a face is detected, the <p> AF
point will appear over the face to be
focused.
You can also tap the LCD monitor screen
to select the face or subject. If the subject
is not a face, <t> will be displayed.
If no faces can be detected, or if you tap
the LCD monitor but do not select any
face or subject, the camera will switch to
[FlexiZone - Multi] with automatic
selection (p.116).
u (face)+Tracking: c