Filter
Top Products
Troubleshooting Guide
332
If the number of images in the card exceeds the maximum number of
images that the camera can display, [###] will be displayed (p.235).
If the LCD monitor is dirty, use a soft cloth to clean it.
In low or high temperatures, the LCD monitor display may seem slow or
may look black. It will return to normal at room temperature.
[Eye-Fi settings] will appear only when an Eye-Fi card is inserted in the
camera. If the Eye-Fi card has a write-protect switch set to the LOCK
position, you will not be able to check the card’s connection status or
disable Eye-Fi card transmission (p.305).
It is the highlight alert (p.258). Overexposed highlight areas with a loss
of highlight detail will blink.
If the image is protected, it cannot be erased (p.252).
Movies edited with a computer using EOS software such as
ImageBrowser EX (p.350) or other software cannot be played back with
the camera. However, video snapshot albums edited with EOS Video
Snapshot Task (p.200) can be played back on the camera.
[###] is displayed.
The LCD monitor does not display a clear image.
[Eye-Fi settings] does not appear.
Playback Problems
Part of the image blinks in black.
The image cannot be erased.
The movie cannot be played back.