Filter
Top Products
wPrinting
274
5
Set the date and file number
imprinting.
Set it if necessary.
Select [I], then press <0>.
Set as desired, then press <0>.
6
Set the number of copies.
Set it if necessary.
Select [R], then press <0>.
Select the number of copies, then press
<0>.
7
Start printing.
Select [Print], then press <0>.
The [Default] setting for printing effects and other options are the printer’s
own default settings as set by the printer’s manufacturer. Refer to the printer’s
instruction manual to find out what the [Default] settings are.
Depending on the image’s file size and image-recording quality, it may take
some time for the printing to start after you select [Print].
If image tilt correction (p.276) is applied, it may take longer to print the image.
To stop the printing, press <0> while [Stop] is displayed, then select [OK].
If you execute [Clear all camera settings] (p.220), all the settings will revert
to their defaults.