Filter
Top Products
275
wPrinting
In step 4 on page 273, if the [ze] icon
is displayed brightly when you select a
printing effect, you can press the <B>
button to adjust the printing effect. What can
be adjusted or what is displayed will depend
on the selection made in step 4.
Brightness
The image brightness can be adjusted.
Adjust levels
When you select [Manual], you can change the
histogram’s distribution and adjust the image’s
brightness and contrast.
With the Adjust levels screen displayed, press the
<B> button to change the position of the [h].
Press the <Y> <Z> keys to change the shadow
level (0-127) or highlight level (128-255).
kBrightener
Effective in backlit conditions that can make the subject’s face look dark.
When [On] is set, the face will be brightened for printing.
Red-eye corr.
Effective for images shot using flash, where the subject has red eye. When
[On] is set, the red eye will be corrected for printing.
e Adjustment of Printing Effects
The [kBrightener] and [Red-eye corr.] effects will not be reflected on the
screen.
When you select [Detail set.], you can adjust the [Contrast], [Saturation],
[Color tone], and [Color balance]. To adjust the [Color balance], change the
values: B is for blue, A for amber, M for magenta, and G for green. The
image’s color balance will be corrected towards the selected color.
If you select [Clear all], all the printing effect settings will be reverted to their
defaults.