Filter
Top Products
37
If you set the power to <1> and the date/time/zone setting screen
appears, see page 41 to set the date/time/zone.
Pressing the power button toggles between
<1> and <2>.
With the power <2>, holding down the
<x> button for 2 sec. or longer will start the
playback mode.
When an EF-M lens is attached to the
camera and the power is off, the aperture
stops down to reduce the amount of light
entering the camera and protect the
internal components of the camera.
When you set the power to <1> or
<2>, the aperture makes a small
noise as it opens or closes.
When you set the power to <1>/<2> or if the time set with [Camera
auto off] under [52: Power saving] elapses and the camera turns off,
sensor cleaning will be executed automatically. (A small sound may be
heard.) During the sensor cleaning after intentionally turning the camera
<2>, the LCD monitor will display the <f> icon.
If you repeatedly switch the power to <1>/<2> at a short interval,
the <f> icon may not be displayed. This is normal and not a
malfunction.
Turning on the Power
Automatic Self-Cleaning Sensor
If you set the power to <2> while an image is being recorded to the card,
[Recording...] will be displayed and the power will turn off after the card finishes
recording the image.