Filter
Top Products
226
Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that
may be visible on captured images. However, if visible dust still remains, you
can append the Dust Delete Data to images for erasing the dust spots later.
The Dust Delete Data is used by Digital Photo Professional (EOS software,
p.350) to erase the dust spots automatically.
Prepare a solid white object such as a sheet of paper.
Set the lens focal length to 50 mm or longer.
Set the lens focus mode switch to [MF] and set the focus to infinity (∞). If
the lens has no distance scale, look at the front of the lens and turn the
focusing ring clockwise all the way.
1
Select [Dust Delete Data].
Under the [A4] tab, select [Dust Delete
Data], then press <0>.
2
Select [OK].
Select [OK] and press <0>. After the
automatic self-cleaning of the sensor is
performed, a message will appear.
Although there will be a shutter sound
during the cleaning, a picture is not
taken.
3 Appending Dust Delete Datat
Preparation
Obtain the Dust Delete Data