Canon EOS M2 Digital Camera User Manual


 
335
If there is a problem with the camera, an error
message will appear. Follow the on-screen
instructions.
* If the error still persists, write down the error number and contact your nearest
Canon Service Center.
Error Codes
Number Error Message and Solution
01
Communications between the camera and lens is faulty.
Clean the lens contacts.
Clean the electrical contacts on the camera and lens, use a
Canon lens, or remove and install the battery pack again
(p.22, 23, 34).
02
Card cannot be accessed. Reinsert/change card or format
card with camera.
Remove and insert the card again, replace the card, or format
the card (p.34, 57).
04
Cannot save images because card is full. Replace card.
Replace the card, erase unnecessary images, or format the
card (p.34, 254, 57).
06
Sensor cleaning could not be performed. Turn the camera
off and on again.
Operate the power button (p.37).
10, 20
30, 40
50, 70
80, 99
An error prevented shooting. Turn the camera off and on
again or re-install the battery.
Operate the power button, remove and install the battery pack
again, or use a Canon lens (p.37, 34).
60
An error prevented shooting. Turn the camera off and on
again or re-install the battery.
The lens movement may be obstructed. Turn the camera off
and on again, taking care not to touch the lens.
Error number
Cause and countermeasures