Filter
Top Products
32
1
Remove the protective cover.
Detach the protective cover provided with
the battery.
2
Attach the battery.
Align the battery’s h mark with the
battery charger’s g mark, then attach the
battery securely.
To detach the battery, follow the above
procedure in reverse.
3
Recharge the battery.
For LC-E12
As shown by the arrow, flip out the
battery charger’s prongs and insert the
prongs into a power outlet.
For LC-E12E
Connect the power cord to the charger
and insert the plug into a power outlet.
Recharging starts automatically and the
charge lamp lights up in orange.
When the battery is fully recharged, the
full-charge lamp will light up in green.
It takes approx. 2 hours to fully recharge a completely exhausted battery at
room temperature (23°C / 73°F). The time required to recharge the battery will
vary greatly depending on the ambient temperature and the battery’s
remaining capacity.
For safety reasons, recharging in low temperatures (5°C - 10°C / 41°F - 50°F) will
take longer (up to approx. 4 hours).
Charging the Battery
LC-E12
LC-E12E
Full-charge lamp
Charge lamp