Filter
Top Products
Troubleshooting Guide
330
If you change the shutter speed or aperture during movie shooting, the
changes in the exposure may be recorded.
Zooming the lens during movie shooting can cause changes in the
exposure regardless of whether the lens’ maximum aperture changes
or not. Changes in the exposure may be recorded as a result.
If you move the camera to the left or right quickly (high-speed panning)
or shoot a moving subject, the image may look distorted.
Flickering, horizontal stripes (noise), or irregular exposures can be
caused by fluorescent light, LED bulbs, or other light sources during
movie shooting. Also, changes in the exposure (brightness) or color
tone may also be recorded. With movie manual exposure, a slower
shutter speed may solve the problem.
If the camera is connected to a printer, computer, GPS receiver, or other
device with an interface cable, or if it is connected to a TV set with a
stereo AV cable or HDMI cable (both sold separately), Wi-Fi cannot be
set ([52: Wi-Fi] will be grayed out). Disconnect the cable, then set the
Wi-Fi.
For details, refer to the Wi-Fi Function Instruction Manual.
Check if your finger is covering the speaker (p.23).
The exposure changes during movie shooting.
The subject looks distorted during movie shooting.
The image flickers or horizontal stripes appear during movie
shooting.
Wi-Fi
Wi-Fi cannot be set.
Operation Problems
During touch screen operations, the beeper suddenly sounds
softer.