Filter
Top Products
3 Lens Peripheral Illumination / Chromatic Aberration Correction
160
1
Select the setting.
Check that [Correction data available]
is displayed for the attached lens.
Select [Chromatic aberration], then
press <0>.
Select [Enable], then press <0>.
If [Correction data not available] is
displayed, see “Lens Correction Data” on
the next page.
2
Take the picture.
The image will be recorded with the
chromatic aberration corrected.
Chromatic Aberration Correction
With [Enable], the maximum burst for continuous shooting will greatly
decrease.
If you play back a RAW image shot with the chromatic aberration corrected,
the image will be displayed on the camera without the chromatic aberration
correction applied. Check the chromatic aberration correction with Digital
Photo Professional (EOS software, p.350).