Filter
Top Products
269
Preparing to Print
6
Play back the image.
Press the <x> button.
The image will appear, and the [w] icon
will appear on the upper left to indicate
that the camera is connected to a printer.
wPictBridge
Before using the printer, make sure it has a PictBridge connection port.
Movies cannot be printed.
The camera cannot be used with printers compatible only with CP Direct or
Bubble Jet Direct.
If there is a long beeping sound in step 5, it indicates a problem with the
printer. Resolve the problem displayed in the error message (p.277).
Printing is not possible when shooting mode is set to <
F> or <G>, or when
Multi Shot Noise Reduction is set.
If [52: Wi-Fi] is set to [Enable], direct printing via an interface cable is not
possible. Set it to [Disable], then connect the interface cable.
You can also print RAW images taken with this camera.
If you use a battery pack to power the camera, make sure it is fully charged.
With a fully-charged battery, printing up to approx. 2 hr. 30 min. is possible.
Before disconnecting the cable, first turn off the camera and printer. Hold the
plug (not the cord) to pull out the cable.
For direct printing, using AC Adapter Kit ACK-E12 (sold separately) to power
the camera is recommended.