Filter
Top Products
Auto Correction of Brightness and Contrastt
154
Under [54: Custom Functions (C.Fn) ], if [3: Highlight tone priority] is set
to [1: Enable], the Auto Lighting Optimizer will be set automatically to
[Disable] and the setting cannot be changed.
Depending on the shooting conditions, noise may increase.
When the effect of Auto Lighting Optimizer is too strong and the image
becomes excessively bright, set it to [Low] or [Disable].
If a setting other than [Disable] is set and you use exposure compensation or
flash exposure compensation to darken the exposure, the image may still
come out bright. If you want a darker exposure, set this function to [Disable].
In step 2, if you press the <B> button and uncheck [X] the [Disable
during man expo] setting, the Auto Lighting Optimizer can be set in the <a>
mode.
The Auto Lighting Optimizer can also be set with [A3: Auto Lighting
Optimizer].