Filter
Top Products
Installing and Removing the Battery and Card
36
After opening the card slot/battery compartment cover, be careful not to swing
it back further. Otherwise, the hinge may break.
When the access lamp is blinking in orange, it indicates that images are
being written to or read by the card, being erased, or data is being
transferred. Do not open the card slot/battery compartment cover. Also,
never do any of the following while the access lamp is blinking in
orange. Otherwise, the image data, card, or camera may be damaged.
• Removing the card.
• Removing the battery.
• Shaking or banging the camera around.
If the card already contains recorded images, the image number may not start
from 0001 (p.214).
If a card-related error message is displayed on the LCD monitor, remove and
reinsert the card. If the error persists, use a different card.
If you can transfer all the images on the card to a computer, transfer all the
images and then format the card with the camera (p.57). The card may then
return to normal.
Do not touch the card’s contacts with your fingers or metal objects.
Multimedia cards (MMC) cannot be used (card error will be displayed).
The number of possible shots depends on the remaining capacity of the card,
image-recording quality, ISO speed, etc.
Setting [A1: Release shutter without card] to [Disable] will prevent you
from forgetting to insert a card (p.208).