Filter
Top Products
1-3
Cisco NAC Guest Server Installation and Configuration Guide
OL-15986-01
Chapter 1 Welcome to Cisco NAC Guest Server
Before You Start
Figure 1-1 Shipping Box Contents
Note Because product software is preloaded onto the Cisco NAC Guest Server appliance, the shipping
contents do not include a separate software installation CD.
Rack Mounting
The Cisco NAC Guest Server occupies one rack unit (1U). A rack-mounting kit is included in the
shipment. For rack-mounting information and instructions, refer to the 1U Rack Hardware Installation
Instructions for HP Products document also included in the shipment.
Cisco NAC Guest Server Licensing
You need to obtain and install a FlexLM product license for your Cisco NAC Guest Server via its web
interface for your system to work. See
Accessing the Administration Interface, page 3-1 for instructions
on how to obtain and install license(s) for your system.
For additional details, refer to Cisco NAC Appliance Service Contract / Licensing Support.
Upgrading Firmware
The Cisco NAC Guest Server is based on the Cisco NAC Appliance 3310 (NAC-3310) hardware
platform. The Cisco NAC Guest Server appliance is subject to any system BIOS/Firmware upgrades
required for the server model on which it is based. NAC-3310 is based on the HP ProLiant DL140 G3
and may require periodic firmware upgrades.
Note For further details refer to Supported Hardware and System Requirements for Cisco NAC Appliance
(Cisco Clean Access).
Important
Safety
Information
Cisco NAC
Appliance
Getting Started
Guide
Cisco
Information
Packet
185434
Cisco NAC Guest Server
RJ-45 cable
(straight-through)
AC power co
rd
Rack mounting kit
Documentation
DB-9 serial null modem cable