Filter
Top Products
8-4
Cisco NAC Guest Server Installation and Configuration Guide
OL-15986-01
Chapter 8 Configuring RADIUS Clients
Deleting RADIUS Clients
Figure 8-4 Edit RADIUS Client
Step 3 In the Edit Radius Client page (Figure 8-4), edit the IP Address of the RADIUS client.
Step 4 Edit the shared secret used between the client and the Cisco NAC Guest Server in the Secret and
Confirm Secret fields.
Step 5 Make any desired changes to the Description.
Step 6 If you want the RADIUS client to send any additional attributes upon successful authentication enter the
attribute name and value and click the Add button. You can enter as many attributes as you need. If you
want to remove an attribute select the attribute from the table and click the Delete button.
Step 7 Click Save Settings.
Step 8 From the administration interface select Devices > Radius Clients (Figure 8-1)from the left hand menu.
Step 9 Click the Restart button to restart the RADIUS service to make the changes take effect.
Deleting RADIUS Clients
Step 1 From the administration interface select Devices > Radius Clients from the left hand menu.