Filter
Top Products
8-3
Cisco NAC Guest Server Installation and Configuration Guide
OL-15986-01
Chapter 8 Configuring RADIUS Clients
Editing RADIUS Clients
Step 5 Type a shared Secret for the RADIUS client. This must match the shared secret specified in the
configuration of the RADIUS client.
Step 6 Retype the shared secret in the Confirm Secret field.
Step 7 Type a Description of the client and any other information needed.
Step 8 If you want the RADIUS client to send any additional attributes upon successful authentication enter the
attribute name and value and click the Add button. You can enter as many attributes as you need. If you
want to remove an attribute select the attribute from the table and click the Delete button.
Step 9 Click the Add Radius Client button.
Step 10 From the administration interface select Devices > Radius Clients (Figure 8-1)from the left hand menu.
Step 11 Click the Restart button to restart the RADIUS service to make the changes take effect.
Editing RADIUS Clients
Step 1 From the administration interface select Devices > Radius Clients from the left hand menu.
Figure 8-3 RADIUS Clients List
Step 2 In the Radius Clients page (Figure 8-3), select the RADIUS client from the list and click the Edit Radius
button.