Filter
Top Products
2-7
Cisco NAC Guest Server Installation and Configuration Guide
OL-15986-01
Chapter 2 Installing Cisco NAC Guest Server
Re-Imaging the Appliance
Note If you press <Enter> by mistake on a serial connection, the imaging process will still run, but
there is no display until the appliance reboots at the end of the process.
Step 6 The system image automatically installs on the hard disk (Figure 2-8).
Figure 2-8 Transferring Install Image
Step 7 When the install image is successfully, transferred the system reboots automatically (Figure 2-9).
Figure 2-9 Appliance Reboots
Step 8 The CD-ROM automatically ejects from the appliance.
Note Remove the CD and store it safely so that the appliance does not accidentally reboot from it at
a later time.