Filter
Top Products
Operating Instructions
3–56
1780R-Series Operator’s Manual
Measure Menu
Left CRT display
Figure 3–27: Measure Menu Screen
Using the Measure Menu
Push the front-panel MEASURE button to enter the Measurement
menu, illustrated in Figure 3–27.
To select a measurement type, touch the desired measurement on the
screen. (Selections are described in Table 3–9.)
Example: touch <DP & DG> to access simultaneous
Differential Phase and Differential Gain
measurements.
The menu display is replaced by vector and waveform displays, with
the selected measurement indicated in the upper left corner of the
vectorscope CRT.
Operating Instructions
3–56
1780R-Series Operator’s Manual
Measure Menu
Left CRT display
Figure 3–27: Measure Menu Screen
Using the Measure Menu
Push the front-panel MEASURE button to enter the Measurement
menu, illustrated in Figure 3–27.
To select a measurement type, touch the desired measurement on the
screen. (Selections are described in Table 3–9.)
Example: touch <DP & DG> to access simultaneous
Differential Phase and Differential Gain
measurements.
The menu display is replaced by vector and waveform displays, with
the selected measurement indicated in the upper left corner of the
vectorscope CRT.