Filter
Top Products
Operating Instructions
1780R-Series Operator’s Manual
3–39
As soon as any right-side front-panel control setting is changed, the
instrument settings (as configured before that change) are saved, and
the Preset menu is exited.
To recover saved configuration, push the PRESET button again, and
then touch <RECOVER>.
If the Preset menu is exited by pushing the PRESET button,
instrument configuration will not be saved.
Store
Presets can be used to store instrument front-panel configurations
and user-modified measurement setups.
Store a new setup:
H Configure items to be stored.
H Push PRESET button to enter Preset menu.
H Touch <STORE>. If password is enabled, enter the password
now.
H <WHICH PRESET?> is added to the display. <STORE>,
<RECOVER>, <NAME>, and <INIT> are omitted.
H Touch desired preset name.
Example: <PRESET 9> (will now be outlined on touch screen).
CAUTION. When <PRESS HERE TO STORE> is touched, the
previous configuration stored under that preset (Preset 9 in this
example) will be written over. If this is not desired, push the PRESET
menu button now to exit the menu without making changes.
H To store the new setup and return to the Preset menu, touch
<PRESS HERE TO STORE>.
H To exit the Preset menu without storing the new setup, push the
PRESET menu button.
Operating Instructions
1780R-Series Operator’s Manual
3–39
As soon as any right-side front-panel control setting is changed, the
instrument settings (as configured before that change) are saved, and
the Preset menu is exited.
To recover saved configuration, push the PRESET button again, and
then touch <RECOVER>.
If the Preset menu is exited by pushing the PRESET button,
instrument configuration will not be saved.
Store
Presets can be used to store instrument front-panel configurations
and user-modified measurement setups.
Store a new setup:
H Configure items to be stored.
H Push PRESET button to enter Preset menu.
H Touch <STORE>. If password is enabled, enter the password
now.
H <WHICH PRESET?> is added to the display. <STORE>,
<RECOVER>, <NAME>, and <INIT> are omitted.
H Touch desired preset name.
Example: <PRESET 9> (will now be outlined on touch screen).
CAUTION. When <PRESS HERE TO STORE> is touched, the
previous configuration stored under that preset (Preset 9 in this
example) will be written over. If this is not desired, push the PRESET
menu button now to exit the menu without making changes.
H To store the new setup and return to the Preset menu, touch
<PRESS HERE TO STORE>.
H To exit the Preset menu without storing the new setup, push the
PRESET menu button.