Filter
Top Products
Specifications
1780R-Series Operator’s Manual
5–21
Table 5–13: Environmental Summary
Characteristics Supplemental Information
Temperature
Operating
0_ C to +50_ C.
Non-Operating
–55_ C to +75_ C.
Altitude
Operating To 2 km maximum.
Vibration
Operating 0.015 inch (0.38 mm) peak-to-peak 10 –55 Hz, 75 minutes total.
Shock
Non-Operating 30 g acceleration 3 times each major axis. 11 ms halfsine.
Bench Handling 4 inch drop to table top on each of the four bottom corners.
Transportation
Vibration Qualified under National Safe Transit Association (NSTA) Test
Procedure 1A–B–1.
Drop Test Qualified under NSTA Test Procedure 1A–B–2.
Humidity 90 to 95% Noncondensing.
Equipment Type Test and measurement
Safety Class Class I (as defined in IEC 1010–1, Annex H) – grounded
product
Overvoltage Category Overvoltage Category II (as defined in IEC 1010–1, Annex J).
Pollution Degree Pollution Degree 2 (as defined in IEC 1010–1).
Note: rated for indoor use only.
Specifications
1780R-Series Operator’s Manual
5–21
Table 5–13: Environmental Summary
Characteristics Supplemental Information
Temperature
Operating
0_ C to +50_ C.
Non-Operating
–55_ C to +75_ C.
Altitude
Operating To 2 km maximum.
Vibration
Operating 0.015 inch (0.38 mm) peak-to-peak 10 –55 Hz, 75 minutes total.
Shock
Non-Operating 30 g acceleration 3 times each major axis. 11 ms halfsine.
Bench Handling 4 inch drop to table top on each of the four bottom corners.
Transportation
Vibration Qualified under National Safe Transit Association (NSTA) Test
Procedure 1A–B–1.
Drop Test Qualified under NSTA Test Procedure 1A–B–2.
Humidity 90 to 95% Noncondensing.
Equipment Type Test and measurement
Safety Class Class I (as defined in IEC 1010–1, Annex H) – grounded
product
Overvoltage Category Overvoltage Category II (as defined in IEC 1010–1, Annex J).
Pollution Degree Pollution Degree 2 (as defined in IEC 1010–1).
Note: rated for indoor use only.