Filter
Top Products
Advanced Guide
>
About Disc Label Printing >
Printing a Disc Label
> Attaching/Removing the Disc Tray
D013
Attaching/Removing the Disc Tray
Attaching the Disc Tray
Important
Do not attach the Disc Tray until the message asking you to load the printable disc is
displayed. Doing so can damage the printer.
1.
Open the Paper Output Tray (A).
2.
Make sure that the message asking you to load the printable disc is displayed, then open
the Inner Cover (B).
3.
Place the printable disc on the Disc Tray.
Important
Make sure that there is no dirt on the Disc Tray before placing a printable disc on the
Disc Tray.
When placing a printable disc on the Disc Tray, do not touch the printing surface of the
disc or the reflectors (C) on the Disc Tray.
4.72 inches / 12 cm printable disc:
1.
Place the printable disc on the Disc Tray with the printable surface facing up.
3.15 inches / 8 cm printable disc:
Page 337 of 468 pagesAttaching/Removing the Disc Tray