Filter
Top Products
Do not hold the Print Head Holder to stop or move it forcibly. Do not touch the Print Head Holder
until it stops completely.
Important
Do not place any object on the Top Cover. It will fall into the Rear Tray when the Top Cover is
opened and cause the printer to malfunction.
Do not touch the metallic parts or other parts inside the printer.
If the Top Cover is left open for more than 10 minutes, the Print Head Holder moves to the right.
In this case, close and reopen the Top Cover.
Do not open the Inner Cover (A) when replacing the ink tank. If the Inner Cover (A) is open
after replacing the ink tank, be sure to close it.
3.
Remove the ink tank with the lamp flashing fast.
Push the tab (B) and lift the ink tank to remove.
Do no touch the Print Head Lock Lever (C).
Important
Handle the ink tank carefully to avoid staining of clothing or the surrounding area.
Discard the empty ink tank according to the local laws and regulations regarding disposal of
consumables.
Note
Do not remove two or more ink tanks at the same time. Be sure to replace ink tanks one by one
when replacing two or more ink tanks.
For details on ink lamp flashing speed, see
Checking the Ink Status
.
4. Prepare the new ink tank.
(1)
Take a new ink tank out of its package, remove the orange tape ( ) completely,
then remove the protective film (
) completely.
Page 43 of 468 pagesReplacing an Ink Tank