Filter
Top Products
1.
Align the protrusions on both edges of the 3.15 inches / 8 cm Disc Adapter with
indentations on the Disc Tray.
2. Place the 3.15 inches / 8 cm printable disc on the Disc Tray with the printing
surface facing up.
4.
Attach the Disc Tray to the printer.
Note
The Disc Tray may be ejected after a specified period of time has elapsed. In this case,
follow the on-screen instructions to attach the Disc Tray.
5.
Insert the Disc Tray straight until the arrow ( ) on the Inner Cover is almost aligned with
the arrow (
) on the Disc Tray.
(D) Keep the Disc Tray level when inserting it.
(E) Align the arrow ( ) on the Disc Tray with the arrow ( ) on the Inner Cover.
Important
Do not insert the Disc Tray beyond the arrow ( ) on the Inner Cover.
Removing the Disc Tray
Page 338 of 468 pagesAttaching/Removing the Disc Tray