Filter
Top Products
118
FTP File Operations
Chapter 6 File Operations
RMD
Deletes a directory.
Directories can be deleted only in the General directory.
For details, see “File operation restrictions” (page 105).
Command syntax: RMD <SP> <path-name> <CRLF>
MDTM
Acquires the date and time of the most recent modification
of the file in the format “YYYYMMDDhhmmss” (YYYY:
year, MM: month, DD: day, hh: hour, mm: minute, ss:
second).
The date and time cannot be acquired in the following
cases.
• When the path name includes a wildcard (“*”, replaced
by any string of characters, or “?”, replaced by any single
character).
• When the size of the path name is greater than 1023
bytes.
Command syntax: MDTM <SP> <path-name> <CRLF>
Input example: MDTM PROAV/DISCMETA.XML
Extended commands
In the Command syntax, <SP> means a space, entered by
pressing the space bar, and <CRLF> means a new line,
entered by pressing the Enter key.
SITE REPF
Sends an MXF file from the specified path on this unit to
the remote computer. This command allows you to specify
a segment in the body of the MXF file (composed of video
and audio data), for transfer of the required segment only.
• A segment greater than the file size cannot be specified.
• This command cannot be used when the path names
contains a space. Use the SITE REPFL command
instead.
Command syntax: SITE REPF <SP> <path-name> <SP>
<start-frame> <SP> <transfer-size> <CRLF>
<start-frame> specifies an offset from the start of the file.
Data is transferred from the video frame at the offset (the
first frame is 0).
<transfer-size> specifies the number of video frames to
transfer (specify 0 to transfer to the end of the file).
Input example: SITE REPF Clip/C0001.MXF 5 150
(Transfer C0001.MXF. Body data is transferred only
from frame 6 to frame 150.)
SITE REPFL
Sends an MXF file from the specified path on this unit to
the remote computer. This command allows you to specify
a segment in the body of the MXF file (composed of video
and audio data), for transfer of the required segment only.
A segment greater than the file size cannot be specified.
Command syntax: SITE REPFL <SP> “<path-name>”
<SP> <start-frame> <SP> <transfer-size> <CRLF>
<path-name> specifies the path name of the file to transfer.
Enclose the path name in double quotation marks.
<start-frame> specifies an offset from the start of the file.
Data is transferred from the video frame at the offset (the
first frame is 0).
<transfer-size> specifies the number of video frames to
transfer (specify 0 to transfer to the end of the file).
Input example: SITE REPFL “Clip/sakura 0001.MXF” 5 150
(Transfer sakura 0001.MXF. Body data is transferred
only from frame 6 to frame 150.)
SITE FSTS
Acquires the system status of this unit.
One of the following status codes is sent.
• 0: Initial state, or no disc is loaded.
• 1: File system mount is OK.
• 3: File system mount is not OK.
Command syntax: SITE FSTS <CRLF>
SITE MEID
Acquires the media ID of the disc loaded in this unit.
Command syntax: SITE MEID <CRLF>
SITE FUNC
Acquires the function and version of the extended
commands.
Information is sent in the following format.
Command syntax: <main function> <SP> <branch
function> <SP> <branch function version>
For XDCAM, sent in a format like “200 MXF DISK 1”
(“200” is a response code).
Command syntax: SITE FUNC <CRLF>
Note
Note
Notes
Note