Filter
Top Products
135
Setup Menu
Chapter 7 Menus
a) When the PDBK-S1500 or PDBK-F1500 option is installed.
b) Not displayed when the unit is in 23.98P mode.
653 UMID HD VANC LINE Specify the HDSDI signal VANC line into which the UMID should be
inserted.
9H to 17H
to 20H (59.94i, 50i, 29.97P, 25P, 23.98P mode)
9H to 17H
to 25H (59.94P, 50P mode)
Note
The output VANC line during playback follows the setting for recording.
See “Using UMID Data” (page 171) for more information about UMID.
657 ESSENCE MARK SDI OUTPUT Select whether to output essence marks in the SDI output VANC.
off: Do not output.
on
: Output.
660
ESSENCE MARK SD VANC LINE
b)
When menu item 657 is set to “on”, select the line to which to output
essence marks.
12 H (12 line), 13 H (13 line), 15 H (15 line), 16 H (16 line), 17 H (17
line), 18 H (18 line), 19 H (19 line) (59.94i/59.94P/29.97P mode)
9 H (9 line), 10 H (10 line), 12 H (12 line), 13 H (13 line), 14 H (14 line),
15 H (15 line), 16 H (16 line), 17 H (17 line)
, 18 H (18 line) (50i/50P/
25P mode)
665 ESSENCE MARK HD VANC LINE When item 657 is set to “on”, select the line to which to output essence
marks.
9H to 17H
to 20H (59.94i, 50i, 29.97P, 25P, 23.98P mode)
9H to 17H
to 25H (59.94P, 50P mode)
Note
The output VANC line during playback follows the setting for recording.
666 METADATA ITEM OUT Specify whether to include the information from recorded VANC packets
in data items in the DATA ITEM section of MXF files.
off: Do not include VANC packet information in data items.
on
: Include VANC packet information in data items.
668 USER META DATA OUTPUT IN
MXF
Select whether to output user metadata to MXF files.
off: Do not output.
on
: Output.
Menu items in the 600s, relating to the timecode, metadata, and UMID
Item number Item name Settings
HD1500