Filter
Top Products
140
Setup Menu
Chapter 7 Menus
a) When the PDBK-201 option board is installed
834 AUDIO INPUT LEVEL Select the analog audio input source.
Sub-item
1 CH1 line
: Line input
mic: Microphone input
2 CH2 line
: Line input
mic: Microphone input
839 AUDIO AGC/LIMITER MODE For automatic input level adjustments performed on the analog audio
signals recorded on channels 1 and 2, select whether to perform the
adjustments in stereo mode or independently for channels 1 and 2.
mono
: Perform automatic adjustments independently for channels 1 and
2.
stereo: Perform automatic adjustments in stereo mode.
840 AUDIO AGC SELECT Set the AGC saturation level.
off
: AGC does not operate.
–6dB, –9dB, –12dB, –15dB, –17dB: AGC operates when the
VARIABLE switch is set to PRESET.
Note
This setting is valid only for channels where “mic” is selected with setup
menu item 834 AUDIO INPUT LEVEL. Regardless of this setting, AGC is
“off” for channels where “line” is selected.
841 AUDIO LIMITER SELECT Select the limiter saturation level, for limiting large input signals, for use
in manual adjustment of audio input levels.
off
: The limiter does not operate.
–6dB, –9dB, –12dB, –15dB, –17dB: The limiter operates when the
VARIABLE switch is set to PRESET.
Note
This setting is valid only for channels where “mic” is selected with setup
menu item 834 AUDIO INPUT LEVEL. Regardless of this setting, the
limiter is “off” for channels where “line” is selected.
Menu items in the 800s, relating to audio control
Item number Item name Settings
Menu items in the 900s, relating to digital process
Item number Item name Settings
920 SD-SDI H-ANC CONTROL Select whether to add information to the SDI output.
Sub-item
1 AUDIO 5CH-8CH off: Do not add digital audio data channels 5 to 8.
on
: Add digital audio data channels 5 to 8.
2 RP188 ATC off: Do not add RP188 timecode data.
on
: Add RP188 timecode data.
923
AUTO SQUEEZE
a)
Select whether to use auto squeeze mode.
off
: Do not use.
on: Use.
930 DOWN CONVERTER MODE (DC) Select the down-converter mode.
crop
: Select the edge-crop mode.
l-box: Select the letter box mode.
squez: Select the squeeze mode.
931 DOWN CONVERTER LETTER BOX
MODE (DC)
Select the aspect ratio of the down-converter output when menu item
930 is set to “l-box”.
16:9
: Set the aspect ratio of the HD-SD converter output to 16:9.
14:9: Set the aspect ratio of the HD-SD converter output to 14:9.
13:9: Set the aspect ratio of the HD-SD converter output to 13:9.
932 H CROP POSITION (DC) Adjust the H-crop (the horizontal position when cropping in the edge crop
mode) of the down converter output when menu item 930 is set to “crop”.
–120 to 0
to 120
934 CROSS COLOR (DC) Adjust the down-converter cross color.
0 to 8
to 15