Filter
Top Products
34
Initial Setup
Chapter 3 Preparations
Display the system frequency that you want to use, and
then press the SET function button (F5).
The DATE/TIME PRESET screen appears.
4
In the DATE/TIME PRESET screen, set the current
date and time by setting the following items.
YEAR: Year
MONTH: Month
DAY: Day
TIME: Time
TIME ZONE: Time zone (as a difference in hours
with respect to Coordinated Universal Time
(UTC))
In the setting screen, you can change the value of the
flashing digit.
Press the B/IN or b/OUT button to make the previous
digit or next digit start flashing.
Press the V/MARK1 or v/MARK2 button (or turn the
PUSH SET(S.SEL) knob) to increment or decrement
the value of the flashing digit.
When you have finished making settings, press the
SET function button (F5).
The date, time, and time zone settings are saved, and
the message “NOW SAVING...” appears.
5
If you want to save the settings made up to this point,
press the SET function button (F5) again.
The message “NOW SAVING...” appears again, and
the setting screen disappears. Then the unit powers
itself off and on again.
To return to the original screen without saving
settings
Press the RETURN function button (F1).
The time zone is reset to the factory default when you
execute the maintenance menu item M49: RESET ALL
SETUP. You will need to set it again. The date and time
are not reset.
RETURN
SET
INIT
INITIAL SETUP
SYSTEM FREQUENCY
SELECT
1080/50i
INC/DEC : CTRL.KNOB
CANCEL&PREV : F1(RET)
SET&NEXT : F5(SET)
RETURN
SET
INIT
DATE/TIME PRESET
YEAR 2008
MONTH 11
DAY 19
TIME 16:49:00
TIME ZONE UTC+00:00
INC/DEC : CTRL.KNOB
SHIFT : (P)(p)KEY
CANCEL&PREV : F1(RET)
SET&NEXT : F5(SET)
Note
RETURN
SET
INIT
INITIAL SETUP
Push F5(SAVE) Key!!
CANCEL&PREV : F1(RET)
SAVE&REBOOT : F5(SET)