Filter
Top Products
138
Setup Menu
Chapter 7 Menus
a) When the PDBK-S1500 or PDBK-F1500 option is installed.
b) Not displayed when the unit is in 23.98P mode.
731 WIDE MODE Specify whether to record and play back with the addition of wide picture
information.
Sub-Item
1
INPUT
a)
Select whether to save wide picture information to the disc when
recording.
auto
: Automatically save wide picture information when it is detected in
the selected input video signal.
on: Always save wide picture information.
off: Never save wide picture information.
2 OUTPUT Select whether to add wide picture information to the signal output when
down-converter output is set to squeeze mode.
thru (through)
: Do not add.
auto: Add.
Notes
• To add wide picture information to the output signal, another setting is
required in addition to this item. In setup menu item 703, set line 16
(59.94i/59.94P/29.97P/23.98P mode (J)), line 20 (59.94i/59.94P/
29.97P/23.98P mode (UC)), or line 23(50i/50P/25P mode) to “thru”.
• In 59.94i/59.94P/29.97P/23.98P mode (J), output of wide picture
information is given priority if the VITC insertion line is set to line 16 in
setup menu item 601 or 602.
• In 59.94i/59.94P/29.97P/23.98P mode (UC), output of wide picture
information is given priority if the VITC insertion line is set to line 20 in
setup menu item 601 or 602.
740 MASTER LEVEL (HD) Adjust the high-definition video signal output from the HDSDI OUTPUT 1,
2 (SUPER) connectors. This adjusts the Y, PB, and PR levels
simultaneously.
–2048 to 0
to 846
741 Y LEVEL (HD) Adjust the Y level of the high-definition video signal output from the
HDSDI OUTPUT 1, 2 (SUPER) connectors.
–2048 to 0
to 846
742 PB LEVEL (HD) Adjust the PB level of the high-definition video signal output from the
HDSDI OUTPUT 1, 2 (SUPER) connectors.
–2048 to 0
to 846
743 PR LEVEL (HD) Adjust the PR level of the high-definition video signal output from the
HDSDI OUTPUT 1, 2 (SUPER) connectors.
–2048 to 0
to 846
745 SETUP LEVEL (HD) Adjust the setup level of the high-definition video signal output from the
HDSDI OUTPUT 1, 2 (SUPER) connectors.
–272 to 0
to 272
746 SYNC PHASE (HD) Control the H sync phase of the high-definition video signal output from
the HDSDI OUTPUT 1, 2 (SUPER) connectors.
–128 to 0
to 127
747 FINE (HD) Fine control the H sync phase of the high-definition video signal output
from the HDSDI OUTPUT 1, 2 (SUPER) connectors.
0
to 1023
Menu items in the 700s, relating to video control
Item number Item name Settings
HD1500
Menu items in the 800s, relating to audio control
Item number Item name Settings
802 DIGITAL AUDIO MUTING IN
SHUTTLE MODE
Set the audio muting conditions during shuttle playback.
off
: Not muted.
on: Muted.